Solar PLTS — Indonesia
Solar that fits the load,
not the catalogue.
Three engineered packages for grid-tied savings, hybrid resilience, and off-grid operation — plus a containerised Mobile PLTS built to move with the site.
1 kW
to 1 MW
3
engineered packages
25 yrs
panel warranty
The packages
Three packages.
One engineering standard.
Choose the topology that matches the site: on-grid savings, hybrid storage with genset integration, or a stand-alone microgrid.

Paket A, B, and C compared: topology, components, savings, and target sites.
Mobile PLTS
Power that moves
with the site.
A complete solar-plus-storage power unit built around a transportable container. Fold-out PV arrays, inverter, battery, and controls arrive together and can be commissioned in the field — then moved again when the project does.
Rapid
Field deployment
1
Container base unit
24/7
Remote monitoring
Pre-feasibility
Size the array
before the site visit.
Move the rail from 1 kW to 1 MW and see the battery, module, and inverter counts change. Send the result to our engineers as the starting point for a measured load study.
Sizing instrument
From 1 kW to 1 MW.
Pick a load profile, then move along the rail. Each setting shows the PV array, usable battery, module count, inverter count, and mounting area you would expect for that scale.
Indicative pre-feasibility
Factories, warehouses, offices
100 kWp
Indicative design
100 kWp
Daytime profile · 8 h/day
- Usable BESS
- 120 kWh
- Load served
- 42 kW
- Daily generation
- 336 kWh
- Load served
- 42 kW
- Usable BESS
- 120 kWh
- 650 Wp modules
- 154 units
- Inverters
- 2 × 50 kW
- Mounting area
- 400 m²
- Annual yield
- 123 MWh
- CO₂ avoided
- 107 t/yr
Indicative only: 4.2 peak-sun hours per day, 80% performance ratio, 650 Wp modules at 2.6 m² each including access, tiered string inverters, and a 0.87 t CO₂/MWh grid factor. A measured load study sets the final design.
100 kilowatt peak, Daytime profile, 120 kilowatt-hour battery, 154 modules, 2 inverters.
The common standard
Every package is engineered, not assembled.
Each Bamantara PLTS package starts with a load study and a single-line electrical design. Tier-1 monocrystalline modules, IEC/SNI protection, structural mounting, commissioning, and remote monitoring are included as standard. The final scope and price are confirmed after a free site survey — no estimate on this page replaces a stamped design.
- — Load study and single-line electrical design before pricing
- — Tier-1 monocrystalline modules with a 25-year performance warranty
- — IEC/SNI protection, earthing, and surge devices
- — Structural mounting designed for local wind and roof loads
- — Commissioning, as-built documentation, and remote monitoring
- — Free site survey and technical feasibility study across Indonesia
Send the load.
We will size the plant.
Share your site, load profile, and operating hours. Our engineers will return a technical feasibility study and a package recommendation.



