Skip to content
PLTS Paket C off-grid microgrid overview for remote sites with battery storage

Off-grid / microgrid — BK-PLTS-C

24-hour

PLTS Paket C — Remote Energy

A stand-alone solar microgrid for sites with no reliable grid connection.

An off-grid PV and battery system designed to run a remote site 24 hours a day. Solar charges the battery bank, the inverter supplies the load, and an optional genset covers extended bad weather.

Free load study25-year panel warrantyIndonesia-wide

70–90%

Diesel savings

24 h

Daily operation

100%

Grid independence

LFP

Battery storage

The package

What Paket C
is built for.

Paket C replaces diesel as the primary energy source at islands, resorts, fishing facilities, camps, and other locations where extending the grid is impractical. The array and battery are sized for the daily load cycle, with autonomy for cloudy days.

A microgrid controller balances generation, storage, and load. High-load equipment can be scheduled into the solar window, while the battery carries the night load. The optional genset starts only when the battery reaches its reserve floor.

Diesel consumption typically falls 70–90%. Fuel logistics, spill risk, and generator maintenance fall with it, which matters most where every litre has to be shipped in.

Best for

  • Resort
  • Island
  • Fishing facility
  • Exploration camp
  • Remote community
  • Telecommunications

At a glance

  • — Stand-alone off-grid topology
  • — Battery autonomy sized for local weather
  • — Microgrid controller with load scheduling
  • — Optional genset backup

What is included

Everything in the
Paket C package.

  • — Tier-1 monocrystalline PV modules
  • — LFP battery bank sized for night load
  • — Off-grid inverter and charge control
  • — Microgrid controller and load scheduling
  • — Distribution panel and protection
  • — Optional genset and remote monitoring

Final capacity, Bill of Materials, and price are confirmed after the free technical feasibility study. No payment is taken on this page.

Scale check

What 1 kW to 1 MW looks like.

This is the same sizing instrument used across the PLTS family, pre-set to the load profile that suits Paket C.

Sizing instrument

From 1 kW to 1 MW.

Pick a load profile, then move along the rail. Each setting shows the PV array, usable battery, module count, inverter count, and mounting area you would expect for that scale.

Indicative pre-feasibility

Remote sites, islands, camps

100 kWp

Indicative design

100 kWp

24-hour profile · 24 h/day

Usable BESS
340 kWh
Load served
14 kW
Send this sizing on WhatsApp →
Daily generation
336 kWh
Load served
14 kW
Usable BESS
340 kWh
650 Wp modules
154 units
Inverters
2 × 50 kW
Mounting area
400 m²
Annual yield
123 MWh
CO₂ avoided
107 t/yr

Indicative only: 4.2 peak-sun hours per day, 80% performance ratio, 650 Wp modules at 2.6 m² each including access, tiered string inverters, and a 0.87 t CO₂/MWh grid factor. A measured load study sets the final design.

100 kilowatt peak, 24-hour profile, 340 kilowatt-hour battery, 154 modules, 2 inverters.

The common standard

Every package is engineered, not assembled.

Each Bamantara PLTS package starts with a load study and a single-line electrical design. Tier-1 monocrystalline modules, IEC/SNI protection, structural mounting, commissioning, and remote monitoring are included as standard. The final scope and price are confirmed after a free site survey — no estimate on this page replaces a stamped design.

  • — Load study and single-line electrical design before pricing
  • — Tier-1 monocrystalline modules with a 25-year performance warranty
  • — IEC/SNI protection, earthing, and surge devices
  • — Structural mounting designed for local wind and roof loads
  • — Commissioning, as-built documentation, and remote monitoring
  • — Free site survey and technical feasibility study across Indonesia

FAQ

Questions about Paket C.

How many cloudy days can the system ride through?
We size autonomy for the site's worst realistic weather window, usually one to three days, and use the genset as the final backstop. Autonomy is a cost decision: every extra day adds battery capacity.
Can the system grow as the site grows?
Yes. The microgrid is modular. Additional PV strings, battery cabinets, and inverters can be paralleled later, provided the initial design leaves space and protection capacity for the expansion.
What maintenance does an off-grid PLTS need?
Panel cleaning, an annual electrical inspection, and battery health checks. Remote monitoring flags underperformance early, and our engineers handle warranty service.
Is a genset still necessary?
Not always, but it is the cheapest insurance against an unusually long stretch of bad weather or an unexpected load increase. Many clients keep a right-sized genset as a backup rather than as a primary source.

Send the load.
We will size the plant.

Share your site, load profile, and operating hours. Our engineers will return a technical feasibility study and a Paket C recommendation.